Home > Modelling > Milliput
4 x Terracotta Milliput Epoxy Putty. Modelling, Sculpture, Ceramics, Slate, Repair. X1016c

4 x Terracotta Milliput Epoxy Putty. Modelling, Sculpture, Ceramics, Slate, Repair. X1016c


Our Price: £14.50
Description
  • Milliput is an VERY versatile two part epoxy putty . It is perfect for all sorts of applications from modelling to plumbing, car bodies, caravan and boat repairs to many other in home and industry making it an essential purchase.
  • The two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependent on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes.
  • After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set.
  • Milliput is a brilliant adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C.
  • What you need to know
    • Milliput Terracotta two part epoxy putty 4oz (113.4g).
    • Milliput is a versatile putty which adheres to and will seal or bond ceramics, wood, plastics, glass, metals, cement, etc.
    • Can be sculpted and when set can be turned, sawn, drilled, tapped, filed, sandpapered, painted or cellulose sprayed.
    • Very responsive to water. When sculpting and modelling the use of water with scalpels, wire tools, probes, engraving tools, soft brushes and cloths, etc is strongly recommended.
    • Will set under water.
    • Heat resisting to 130 degrees.
    • For the restoration of terracotta and other ceramics. Also for the repair of garden urns, pots, statuettes and damaged brickwork, etc.
    • Also for sculpting and modelling.
EAN: 5021954691392
Bookmark and Share

Customer Reviews
Write an online review and share your thoughts with other shoppers!