• Heart shaped candle mould with tapered sides. 
• Dimensions:
  • The heart shape tapers from 75mm x 70mm down to 50mm x 35mm.
  • The height of the mould is 120mm
• Here’s a few tips to get a good finish:
  • remember not to pour in your wax too hot ... pour wax in slowly.
  • use a bit of blue tack to cover any holes this keeps the wick still and stops any extra wax escaping;
  • you can get mould release spray from craft shops.  This is good to coat the mould before you use it, but you can also use a bit of olive oil spray too.
• PLEASE NOTE THAT YOU WILL ONLY RECEIVE THE CANDLE MOULD. THE CANDLES PICTURED WERE MADE USING THIS MOULD BUT THIS PHOTOGRAPH IS FOR VISUAL REFERENCE PURPOSES ONLY.
• We hope this helps.
• We have these listed in a set too, check out our other listings.
• Proops Brothers have been serving this industry for over 80 years.

Manufacturer:
Linic Products Ltd
Victoria Works Saddington Road
Fleckney Leicestershire LE8 8AW,
United Kingdom

Authorised Representative in EU:
Euverify Ltd,
Unit 3D North Point House, North Point Business Park,
New Mallow Road, Cork, T23 AT2P,
Ireland
Email: info@euverify.com
Phone: +353 212439123

Keep away from children.
Keep away from anything flamable,
Wear suitable protection.
Using candles safely.
To prevent fire and serious injury, burn candle within sight. Keep away from drafts and vibrations.
Keep out of reach of children and pets. Never burn candle on or near anything that can catch fire.
Trim wick to 5mm before lighting. Keep candle free of any foreign materials including matches and
wick trimmings. Only burn the candle on a level, fire resistant container. Do not burn the candle
for more than 4 hours at a time. Never burn a candle to the bottom. The candle must be removed
from the plastic mould before it is lit.