Candle Mould Seamless Pillar Shape, Set x 3, 4 1/2

Candle Mould Seamless Pillar Shape, Set x 3, 4 1/2" Long, 2" Dia, UK Made. S7588

Description

Here we have another great set from Proops Brothers Ltd, buy as a set and save!
Made by our parent company Linic plastics ltd here in Fleckney, Leicestershire.
Set x 3 pillar candle moulds, 4 1/2" high dia 2".
If you are new to candle making or have not used rigid plastic moulds before here are a few tips to get a good finish: Use candle mould seal putty (or you can use a little piece of bluetac) to cover the wick hole and any seams, this keeps the wick still and stops any wax escaping. You can get mould release spray from craft shops. This is good to coat the mould before you use it, but you can also use a little olive oil spray too. Make sure you are using wax suitable for pillar candles. Remember not to pour in your wax too hot and pour slowly. Allow the candles to set fully before trying to remove - at least 24 hours. If still a little tight to the mould after this time, ONLY WHEN FULLY COOLED AND SET, pop into the fridge for a short time, this shrinks the wax a little and the candles should just pop out. We hope this helps. Issues with removing the candles usually stem from trying to remove too soon, too much fragrance or colouring, wrong temperature of wax when pouring - different waxes require different pouring temperatures and react differently to colour and fragrance... you can check the correct temperature, etc by looking on candle making forums where expert candle makers give great advice.
Please note : You will only receive the candle moulds. Candles shown are for visual reference purposes only.

EAN: 5021954706720

Customer Reviews
Write an online review and share your thoughts with other shoppers!