Welcome to Proops Brothers retail site. If you are a trade customers please visit www.proopsbrotherstrade.com
Welcome to Proops Brothers retail site. If you are a trade customers please visit www.proopsbrotherstrade.com
product review overlay image

Product Description

  • 4" or 100mm dia sphere round candle mould.
  • The mould splits in two halves.
  • This candle mould is made from plastic.
  • Here’s a few tips to get a good finish using the candle mould:
    • It is good idea to coat the mould before you use it to make it easier to remove the candle; you can either use some mould release spray or a bit of olive oil spray. 
    • Use a bit of blue tack to cover any holes or seals as this stops any extra wax escaping from the bottom of the mould and the middle where the two halves join.
    • Allow the wax to cool for a couple of minutes before you pour and when you pour make sure you do so slowly. We hope this helps!
  • We have a variety of candle moulds available and are continuously coming up with new ideas on what the next shape will be so make sure to keep an eye out.
  • PLEASE NOTE THAT YOU WILL ONLY RECEIVE THE CANDLE MOULDS. THE CANDLE AND BATH BOMB PICTURED WERE MADE USING THIS MOULD BUT THESE PHOTOGRAPHS ARE FOR VISUAL REFERENCE PURPOSES ONLY.

Specifications

EAN
5021954715586
Product Code
S7803

Customer Reviews

Candle Mould Round/Sphere, Large Round Mold 4" 100mm dia, UK Made. S7803

Item in Stock (457 Available)

Product Code S7803