• Set of 3 candle moulds.
• Pillar candle mould : 113mm x 50mm.
• Sphere or ball candle mould : 75mm dia. 
• Square top, rectangular tapered pillar. Top and sides measure 60 x 60 x 120 mm tapering down slightly square on the bottom measures 50 x 50 mm.
• Here’s a few tips to get a good finish.
  • Remember not to pour in your wax too hot ... pour wax in slowly, use a bit of blue tack to cover any holes or seals, this keeps the wick still and stops any extra wax escaping.
  • You can get mould release spray from craft shops, this is good to coat the mould before you use it, but you can also use a bit of olive oil spray too.
• PLEASE NOTE THAT YOU WILL ONLY RECEIVE THE CANDLE MOULDS.  THE CANDLES SHOWN ARE FOR VISUAL REPRESENTATION PURPOSES ONLY TO SHOW HOW THE MOULDS CAN BE USED.

Manufacturer:
Linic Products Ltd
Victoria Works Saddington Road
Fleckney Leicestershire LE8 8AW,
United Kingdom

Authorised Representative in EU:
Euverify Ltd,
Unit 3D North Point House, North Point Business Park,
New Mallow Road, Cork, T23 AT2P,
Ireland
Email: info@euverify.com
Phone: +353 212439123

Keep away from children.
Keep away from anything flamable,
Wear suitable protection.
Using candles safely.
To prevent fire and serious injury, burn candle within sight. Keep away from drafts and vibrations.
Keep out of reach of children and pets. Never burn candle on or near anything that can catch fire.
Trim wick to 5mm before lighting. Keep candle free of any foreign materials including matches and
wick trimmings. Only burn the candle on a level, fire resistant container. Do not burn the candle
for more than 4 hours at a time. Never burn a candle to the bottom. The candle must be removed
from the plastic mould before it is lit.