• Here we have another fantastic deal from Proops Brothers Ltd, buy as a set and save!
• Made by our parent company Linic Plastics Ltd here in Fleckney, Leicestershire.
• 4 sided pyramid candle mould with removable stand/base.
  • Mould produces candles approximately 4" tall, with a base of 3" square.
• Tall Taper shaped candle mould:
  • 9 1/2" long. 7/8" at top. 3/8" at bottom. 
• Square top, rectangular tapered sided candle mould:
  • Top and sides measure 60 x 60 x 120 mm 
  • Tapering down slightly, square on the bottom measures 50 x 50 mm.
• Pillar candle mould: 
  •  4 1/2" high, dia 2".
• Here’s a few tips to get a good finish: Remember not to pour in your wax too hot ... pour wax in slowly, use a bit of blue tack to cover any holes, this keeps the wick still and stops any extra wax escaping. You can get mould release spray from craft shops. This is good to coat the mould before you use it, but you can also use a bit of olive oil spray too. We hope this helps.
• PLEASE NOTE THAT THE CANDLES DISPLAYED IN THE MAIN IMAGE ARE FOR DISPLAY PURPOSES ONLY AND YOU WILL ONLY RECEIVE THE CANDLE MOULDS.
• We have these listed in a singles too check out our other listings.

Manufacturer:
Linic Products Ltd
Victoria Works Saddington Road
Fleckney Leicestershire LE8 8AW,
United Kingdom

Authorised Representative in EU:
Euverify Ltd,
Unit 3D North Point House, North Point Business Park,
New Mallow Road, Cork, T23 AT2P,
Ireland
Email: info@euverify.com
Phone: +353 212439123

Keep away from children.
Keep away from anything flamable,
Wear suitable protection.
Using candles safely.
To prevent fire and serious injury, burn candle within sight. Keep away from drafts and vibrations.
Keep out of reach of children and pets. Never burn candle on or near anything that can catch fire.
Trim wick to 5mm before lighting. Keep candle free of any foreign materials including matches and
wick trimmings. Only burn the candle on a level, fire resistant container. Do not burn the candle
for more than 4 hours at a time. Never burn a candle to the bottom. The candle must be removed
from the plastic mould before it is lit.