Deluxe Riveting 4 Hole Metal Punch. J2280
- Deluxe riveting 4 hole metal punch designed to punch holes into soft metals.
- Punch will create holes measuring approximately: 2mm, 1.5mm, 1.3mm and 1mm in diameter.
- Will punch holes in sheet metal up to around 18 gauge or 1mm thick.
- Removable metal depth tray held in place by two thumb screws.
- Markings on the tray and frame at 1/4" intervals to help align the metal.
- Allen key provided to tighten punch.
- Overall size of punch:
- length: 106mm
- depth: 25mm
- width: 50mm including guide plate