Set of 23 Candle Moulds Molds including, Cork, Wax Melts, Votive, Number, Pillar, Pyramid etc. S7678

Product Description

Set of 23 different shaped candle making moulds.
Easter wax melt tart tray:
- You can make a total of 12 wax melt tarts per tray and each tray includes 6 different patterns including Easter bunnies, lambs, cross design, eggs, and 2 different flower designs.
- This tray works by imprinting the various patterns into your wax melts/tarts, but the egg design creates a raised look (as pictured).
- Each mould is approximately 50mm wide with a 13mm depth.
Summer Inspired wax melt tart tray:
- You can make a total of 12 wax melt tarts per tray and each tray includes 12 different patterns: watermelon, ice lollies, palm tree, flower, butterfly, seashell, cocktails, strawberry, ice cream, pineapple, sun and a bee.
- This tray works by imprinting the various patterns into your wax melts/tarts.
- Each mould is approximately 50mm wide with a 13mm depth.
- Made of rigid plastic.
Wine bottle cork shape candle mould:
- This mould can make the following size candles: up to 14cm/5.5" tall and tapers from 20mm down to 19mm
- The bottom of the mould is octagonal shaped, making it easier to shave if needed when placing in the top of a wine bottle (as pictured).
6 piece cake slice shape mould:
- Includes removable spacers to alternatively create a large round candle.
- Includes a specially designed 3 wick holder.
- Each slice measures 67mm x 70mm x 65mm
- Alternatively you can remove the spacers and make candles measuring 140mm in diameter and 65mm tall.
Wax melt tart tray (flowers, heart, swirl etc):
- You can make a total of 12 wax melt tarts per tray and each tray includes 6 different patterns as pictured.
- This tray works by imprinting the various designs into your wax melts/tarts.
- Each mould is approximately 50mm wide with a 13mm depth.
Set of birthday cake candle moulds, letters, capital letters, A - Z (consisting of 2 trays):
- Each letter measures approx 37mm square (excluding where the stick goes).
Set of number birthday cake candle moulds:
- Each number measures about 45mm x 30mm plus a place to put a cocktail stick or the like.
Heart shaped candle mould with tapered sides:
- The heart shape tapers from 75mm x 70mm down to 50mm x 35mm.
- The height of the mould is 120mm
Egg shaped candle mould with removable stand/base:
- Mould produces candles approximately 71mm tall and measures 50mm at the widest part of the egg shape.
Arc/curved candle mould:
- Height: 70mm, Length: 113mm, Width: 38mm
- This mould has 3 wick holes.
- Cone shaped candle mould with removable stand/base:
Cone shaped candle mould with removable stand/base:
- Mould produces candles approximately 4.5" tall with a 3.1" wide base that tapers to a point.
Votive candle mould:
- Approx 52mm high and 43mm in diameter.
Tall taper / dinner candle mould:
- 7/8" at the top tapering to 3/8" at the bottom.
- 9 1/2" long.
4 sided pyramid candle mould with removable stand/base:
- Mould produces candles approximately 4" tall, with a base of 3" square.
Square top, rectangular tapered side candle mould:
- Top and sides measure 60 x 60 x 120mm tapering down slightly.
- Square on the bottom measures 50 x 50mm.
Pillar shaped candle mould:
- 4 1/2" high and 2" dia.
Small sphere candle mould:
- 3" in diameter
Large sphere candle mould:
- 4" in diameter
Candle mould tray with 4 shapes:
- Heart Shaped- width (biggest part) is 67mm. Bottom tip to top tip is 61mm. Depth 30mm.
- Flower Shaped- depth 30mm, width 75mm, ridge to ridge 19mm.
- Ridged Dome- diameter 71mm, ridge to ridge 7mm, depth 30mm.
- Star shaped- width 59mm, ridge to ridge is 23mm, depth is 30mm.
6 sided star shaped tapered candle mould with removable stand/base:
- Mould produces candles approximately 4.3" tall, and measures approx 4.3" from one point of the star to another.
5 sided pentagon pillar candle mould:
- Creates candles that are 71mm or 2.8" wide x 114mm or 4 1/2" high.
Christmas wax melt tart tray:
- You can make a total of 12 wax melt tarts per tray and each tray includes 6 different patterns including snowflakes, baubles, Christmas trees, holly, presents and manger scenes.
- This tray works by imprinting the various patterns into your wax melts/tarts.
- Each mould is approximately 50mm wide with a 13mm depth.

A step by step guide on how to use the number/letter mould trays:
1). Start by using a bit of mould release spray or olive oil spray in each of the number/letter moulds.
2). Secondly place a cocktail stick in each of the allotted slots below the number/letter.
3).Then place a bit of blu tack at the bottom of the number where the mould meets the cocktail stick to make sure the wax does not leak.
4). Using approximately 30mm of wick, place the wick in the mould, making sure it touches the top of the gap above the number/letter.
5). Put some more blu tack at the top of the number to ensure the wax does not leak through to the top of the wick.
6). Pour in your wax and leave your candle to set.
7). Once your candles have set, remove both pieces of blue tac and carefully remove each mould starting from the bottom of the cocktail stick where there is an area to prise with your finger. Or alternatively, you can gently turn the tray over for those moulds that may be more difficult to release, but please be careful not to break them.

Here’s a few tips to get a good finish: Remember not to pour in your wax too hot ... pour wax in slowly, use a bit of blue tack to cover any holes, this keeps the wick still and stops any extra wax escaping. You can get mould release spray from craft shops. This is good to coat the mould before you use it, but you can also use a bit of olive oil spray too. We hope this helps.
PLEASE NOTE THAT YOU WILL RECEIVE ONLY THE MOULDS. THE CANDLES AND OTHER ITEMS SHOW ARE FOR VISUAL REFERENCE PURPOSES ONLY TO SHOW HOW THE MOULDS COULD BE USED.
We have these listed in a singles too check out our other listings.
Proops Brothers have been serving this industry for over 80 years.

Specifications

EAN

5021954711731

Product Code

S7678

Description

Set of 23 different shaped candle making moulds.
Easter wax melt tart tray:
- You can make a total of 12 wax melt tarts per tray and each tray includes 6 different patterns including Easter bunnies, lambs, cross design, eggs, and 2 different flower designs.
- This tray works by imprinting the various patterns into your wax melts/tarts, but the egg design creates a raised look (as pictured).
- Each mould is approximately 50mm wide with a 13mm depth.
Summer Inspired wax melt tart tray:
- You can make a total of 12 wax melt tarts per tray and each tray includes 12 different patterns: watermelon, ice lollies, palm tree, flower, butterfly, seashell, cocktails, strawberry, ice cream, pineapple, sun and a bee.
- This tray works by imprinting the various patterns into your wax melts/tarts.
- Each mould is approximately 50mm wide with a 13mm depth.
- Made of rigid plastic.
Wine bottle cork shape candle mould:
- This mould can make the following size candles: up to 14cm/5.5" tall and tapers from 20mm down to 19mm
- The bottom of the mould is octagonal shaped, making it easier to shave if needed when placing in the top of a wine bottle (as pictured).
6 piece cake slice shape mould:
- Includes removable spacers to alternatively create a large round candle.
- Includes a specially designed 3 wick holder.
- Each slice measures 67mm x 70mm x 65mm
- Alternatively you can remove the spacers and make candles measuring 140mm in diameter and 65mm tall.
Wax melt tart tray (flowers, heart, swirl etc):
- You can make a total of 12 wax melt tarts per tray and each tray includes 6 different patterns as pictured.
- This tray works by imprinting the various designs into your wax melts/tarts.
- Each mould is approximately 50mm wide with a 13mm depth.
Set of birthday cake candle moulds, letters, capital letters, A - Z (consisting of 2 trays):
- Each letter measures approx 37mm square (excluding where the stick goes).
Set of number birthday cake candle moulds:
- Each number measures about 45mm x 30mm plus a place to put a cocktail stick or the like.
Heart shaped candle mould with tapered sides:
- The heart shape tapers from 75mm x 70mm down to 50mm x 35mm.
- The height of the mould is 120mm
Egg shaped candle mould with removable stand/base:
- Mould produces candles approximately 71mm tall and measures 50mm at the widest part of the egg shape.
Arc/curved candle mould:
- Height: 70mm, Length: 113mm, Width: 38mm
- This mould has 3 wick holes.
- Cone shaped candle mould with removable stand/base:
Cone shaped candle mould with removable stand/base:
- Mould produces candles approximately 4.5" tall with a 3.1" wide base that tapers to a point.
Votive candle mould:
- Approx 52mm high and 43mm in diameter.
Tall taper / dinner candle mould:
- 7/8" at the top tapering to 3/8" at the bottom.
- 9 1/2" long.
4 sided pyramid candle mould with removable stand/base:
- Mould produces candles approximately 4" tall, with a base of 3" square.
Square top, rectangular tapered side candle mould:
- Top and sides measure 60 x 60 x 120mm tapering down slightly.
- Square on the bottom measures 50 x 50mm.
Pillar shaped candle mould:
- 4 1/2" high and 2" dia.
Small sphere candle mould:
- 3" in diameter
Large sphere candle mould:
- 4" in diameter
Candle mould tray with 4 shapes:
- Heart Shaped- width (biggest part) is 67mm. Bottom tip to top tip is 61mm. Depth 30mm.
- Flower Shaped- depth 30mm, width 75mm, ridge to ridge 19mm.
- Ridged Dome- diameter 71mm, ridge to ridge 7mm, depth 30mm.
- Star shaped- width 59mm, ridge to ridge is 23mm, depth is 30mm.
6 sided star shaped tapered candle mould with removable stand/base:
- Mould produces candles approximately 4.3" tall, and measures approx 4.3" from one point of the star to another.
5 sided pentagon pillar candle mould:
- Creates candles that are 71mm or 2.8" wide x 114mm or 4 1/2" high.
Christmas wax melt tart tray:
- You can make a total of 12 wax melt tarts per tray and each tray includes 6 different patterns including snowflakes, baubles, Christmas trees, holly, presents and manger scenes.
- This tray works by imprinting the various patterns into your wax melts/tarts.
- Each mould is approximately 50mm wide with a 13mm depth.

A step by step guide on how to use the number/letter mould trays:
1). Start by using a bit of mould release spray or olive oil spray in each of the number/letter moulds.
2). Secondly place a cocktail stick in each of the allotted slots below the number/letter.
3).Then place a bit of blu tack at the bottom of the number where the mould meets the cocktail stick to make sure the wax does not leak.
4). Using approximately 30mm of wick, place the wick in the mould, making sure it touches the top of the gap above the number/letter.
5). Put some more blu tack at the top of the number to ensure the wax does not leak through to the top of the wick.
6). Pour in your wax and leave your candle to set.
7). Once your candles have set, remove both pieces of blue tac and carefully remove each mould starting from the bottom of the cocktail stick where there is an area to prise with your finger. Or alternatively, you can gently turn the tray over for those moulds that may be more difficult to release, but please be careful not to break them.

Here’s a few tips to get a good finish: Remember not to pour in your wax too hot ... pour wax in slowly, use a bit of blue tack to cover any holes, this keeps the wick still and stops any extra wax escaping. You can get mould release spray from craft shops. This is good to coat the mould before you use it, but you can also use a bit of olive oil spray too. We hope this helps.
PLEASE NOTE THAT YOU WILL RECEIVE ONLY THE MOULDS. THE CANDLES AND OTHER ITEMS SHOW ARE FOR VISUAL REFERENCE PURPOSES ONLY TO SHOW HOW THE MOULDS COULD BE USED.
We have these listed in a singles too check out our other listings.
Proops Brothers have been serving this industry for over 80 years.

Reviews

No reviews left yet

Write A Review

Attributes

EAN

5021954711731

Product Code

S7678

Delivery & Returns

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed feugiat sem id nunc finibus, et facilisis dolor aliquam. Donec ex felis, scelerisque ut facilisis et, convallis nec magna. Nulla vel ex eget lacus imperdiet mattis convallis quis leo. Mauris laoreet vulputate mauris. Vestibulum in blandit enim. Vivamus consectetur mattis dapibus. Nullam ultricies malesuada dignissim.

Customer Reviews

Set of 23 Candle Moulds Molds including, Cork, Wax Melts, Votive, Number, Pillar, Pyramid etc. S7678

Item in Stock (50 Available)

Product Code S7678

Product Description

Specifications

Customer reviews

Delivery & Returns

Set of 23 Candle Moulds Molds including, Cork, Wax Melts, Votive, Number, Pillar, Pyramid etc. S7678