Manufacturer:
Linic Products Ltd
Victoria Works Saddington Road
Fleckney Leicestershire LE8 8AW,
United Kingdom

Phone: 0116 2403400

www.linicplastics.co.uk

Authorised Representative in EU:
Euverify Ltd,
Unit 3D North Point House, North Point Business Park,
New Mallow Road, Cork, T23 AT2P,
Ireland
Email: info@euverify.com
Phone: +353 212439123

www.euverify.com

• Caution!  Sharp blade
• Keep away from children. For use by over 18 year olds only
• Wear eye and hand  protection
• Keep the guard on when carrying the scraper. Walk carefully. Do not run with it in your hand.
• Never put the scraper in your pocket.

For the removal of dried paint from a window. Wear gloves. Remove the blade guard, place the blade against the glass and slide up the edge of the frame to remove excess paint.  Keep your other hand behind the blade. Do not scrape towards anyone else or anything precious.

To remove the guard: Wear gloves. With one hand hold the edge of the guard. With the other, push one end of the guard out of the clip that retains it. Carefully pull the guard away from the blade. The window scraper is now ready to be used. Keep the blade guard in a safe place and put it back on the window scraper as soon as you have finished using it.

To put the guard back on: Wear gloves. Place the guard on a firm surface with the large tab faced down. Locate one notch in the scraper onto the guard hook. Carefully push the window scraper into the guard so that the large tab and the two small tabs are either side of the blade. Push together until the other hook clips into the notch. Store in a safe place out of reach of children